By: Mitch Johnson
Invisible inks are very famous among the children. They love to use and
have fun with it. Have you ever think of making it by yourself? If not
then you will surely do it because in this article you will find how to
make an invisible inks naturally without using any chemicals.
Picture Writing
Unless you can draw fairly well, this kind of birchbark picture story
is not for you. (Message-writing on birchbark is not usually practiced
during your art class at school.) Instead, you and your friends can
make up a picture alphabet. Of course, the meaning will be known only
to the insiders. Choose signs that are easy to learn, as illustrated by
the examples given here.
Invisible Inks
You can write clever messages and have a lot of fun using a secret ink that only you and your friends know how to make visible.
To make your ink, use only harmless solutions. On the trail, you can
always carry your bottles and writing materials with you so that they
will be handy.
Writing with secret ink so that outsiders cannot read your message is
not as simple as you might assume. If you use a sharp pen point your
writing will not be as secret as you wish, for the point will scratch
the paper slightly with every stroke. Even if the scratches are not
visible to the naked eye, they can be seen with a magnifying glass.
Therefore you should use a smooth, broad pen point. However, this also
has a drawback. The writing fluid leaves a slight shine on the paper.
If the strokes are too wide, the writing will be perfectly legible when
the sheet is held at an angle to the light.
The most suitable writing tool is a soft stick of wood sharpened to a point. Or you can use a toothpick.
Write on light-colored paper that is not too thin, because thin paper
wrinkles where it has been moistened. This wrinkling can betray the
presence of invisible writing and even make it legible. The best thing
is a solid, hard-surface paper. Cautious writers never use blank sheets
for their messages. Instead, they write some message with regular ink
or pencil which will confuse the outsiders. Then they write the really
important message between the lines with invisible ink. This diverts
the attention of anyone not in on the secret from any possible traces
of the dried invisible ink.
If you want to be really clever, combine the invisible ink with the
normal writing. For instance, write a regular message that is confusing
or meaningless. Then, using invisible ink, cross out some letters in
the false message or put a dot over or under these letters in a way to
make them spell out the really important message. Natural Formulas for
Invisible Inks
You can make your invisible ink out of any one of the following liquids:
Onion juice Lemon juice Salt water Sugar and water Milk thinned slightly with water
Water in which eggshells have been soaked for a few days. After these fluids dry, they become invisible.
To make the writing reappear, carefully warm the sheet by holding the
written side over a flame. Lo and behold! The writing will be visible
in a faint brown color.
About the Author:
Mitch Johnson is a regular writer for www.1-scuba-diving-gear.com/ , www.solidcampfun.info/ , www.ezcampfunguide.info/
Article Source: http://www.therealarticles.com
By: Mitch Johnson
The first thing which we have to do when we decided to choose the wood
carving as our hobby is that we have to find a space for it. Find out
the tips on how to prepare the space for your workshop or studio.
In wood carving it is possible to improvise by making a small working
area in the corner of a living room that is if space is limited. If, on
the other hand, you have a room or dry shed that can be used
exclusively for carving, so much the better. Unlike stone carving,
which creates a great deal of dust, wood carving can be termed a clean
craft as the dust is negligible and the wood chips can easily be swept
up and burned. It is only when carving is combined with general
carpentry and joinery that the complete workshop is absolutely
necessary.
For carving, the first requirement is a really strong bench or table. A
carpenter’s bench will serve, or a stout kitchen table. If you use the
latter, brace the legs with planks of wood at least 3 inch x 1 inch,
near floor level. Diagonal pieces can also be used for extra strength,
but it may be best to get some advice first if you know nothing about
carpentry. An average bench for carving is 5 feet in length, 2 feet to
2 feet 6 inch in width and 3 feet to 3 feet 6 inch in height. Your own
height should be considered. Working at a bench that is too low,
carving can be a back aching business.
Arrange the height so that you can stand comfortably, or sit on a stool
to work. It is advisable to have the bench top at least 1 inch to 2
inch thick. The bench must stand firmly on the floor and not move about
as you work. A flimsy structure is useless. The bench can be used
against a wall or standing free so that you have access to all sides.
It really depends on the size and type of work in hand. Right angled
steel brackets can be used to anchor the bench to the wall or the
floor. Place your bench in a good light as near a window as possible.
Gripping tools and fixing equipment
Although some wood carvers use little in the way of fixing equipment,
most prefer to have their wood firmly held by cramps, beach screws or a
vise. Very small work can be carved in the hand, very large work will
hold steady by virtue of its own weight. In the case of work in the
round, it is very useful to turn and move your work in order to get all
views and to change the direction of cutting. Fixing equipment must be
appropriate for the work in hand.
If you have acquired a carpenter’s bench, it will in all probability
have either a wood or iron bench vise attached to one side. This type
of vise is very useful to the carver also. The metal bench vise can be
bought at a hardware store and is fairly easy to fix, provided you have
a stout bench designed to take it. The larger sizes are bolted to the
bench, the smaller sizes screwed to the underside of the bench top
which should be the same thickness as the depth of the jaws of the
vise. This is in order that the jaws may close flush with the working
surface of the bench. A rectangular recess should be cut in the bench
to take the inner jaw so bringing it flush with the side of the bench
top.
It is important to fix wooden cheeks to the jaws of an iron vise in
order to prevent bruising on your carving. Holes are usually already
drilled in the jaws for this purpose. As sizes and types differ you
should get some information regarding fixing at the time of purchase.
Wood carving does not need a very large space, but you need some space
which you can freely work and concentrate on your object. Choose the
strong table where you have to put the woods. Choose the tools as per
requirement. Make sure to follow all the guidance which are required.
About the Author:
Mitch Johnson is a regular writer for www.kitchen-plans-n-designs.com/ , www.solidcollectables.info/ , www.goodbudgetholiday.info/
Article Source: http://www.therealarticles.com
By: Mitch Johnson
Success cannot be achieved unless we have interest and pleasure in what
we are doing. Due to the lack of interest and pleasure many people
fails to achieved their goal. When you entered in ceramic world, to
fulfill your passion for ceramic, there are some important points which
you have to remember, read on the article and find how to achieve your
goal.
Many part time potters entered the professional ranks when they found
there was a market for molds of their original wares. Other hobbyists
wanted to duplicate the pieces and they were willing to pay for the
molds in which to cast them.
Besides selling their creations and the molds thereof, many
professionals gain added income by teaching classes. Besides the
tuition, which is generally very modest, they sell the necessary
supplies to their students, and green ware, which are un-fired pieces
ready to be decorated, glazed and placed in the kiln. There is no
reason why you cannot turn your pastime into a profitable venture.
However, unless you are some sort of wizard, the likes of which has yet
to be discovered, it will be only after several years of practice.
Though you may producer a perfect example of ceramic art on your very
first attempt, which is not unusual, it requires study, patience and
diligent application to do it time after time.
Besides gaining the sure-handed technique required of the professional,
you will also have to develop the spark of inventive ability exhibited
by the pace-setters in every field of endeavor. There is one more
prerequisite for professionalism, by far the most important: You must
get genuine pleasure from working with clay. If you do, there is a good
chance that in the future you will be able to pad your regular income
by selling the products of your studio.
The primary objective of most beginners, though, is to have fun and at
the same time create fine ceramic items to enrich their homes. If this
is your main target, you will find this a fascinating, rewarding
pastime. Best of all, you’ll be amazed at how soon you are turning out
work you will be proud to show off.
This book is intended to be a guide for those who want to learn about
ceramics for their own pleasure, first. The problems which are most
likely to be puzzling to the tyro will be explained in pictures and
down-to-earth language.
Step by step, you will learn about the tools and materials you will
need; about molds, kilns, the potter’s wheel, colors and glazes. You
will be introduced to the various types of ceramics and learn the
techniques in making each. You will learn how to plan and furnish your
ceramics workshop. Finally, throughout the pages of this book are
special do-it-yourself projects explained in detail, and most of these
can be handled competently by the beginners.
About the Author:
Mitch Johnson is a regular writer for www.curtains-n-drapes.com/ , www.urceramicsguide.info/ , www.goodbudgetholiday.info/
Article Source: http://www.therealarticles.com
By: Charles Kassotis
Now that we have entered the computer age, you would think that
everyone has to know a little bit about electronics and technology,
right? Oddly, not that many people do. Some of us can plug in a
computer, turn it on, and operate a few software programs. Others might
even be able to clean up a computer’s operating system or reconfigure
some of its workings. Yet, a majority of computer users know very
little about how the machinery works or what to do when it doesn’t.
The same holds true for household appliances and gadgets. When the
dishwasher stops working or the satellite goes out, we call a
repairperson and wait on his or her expertise instead of fixing
something ourselves. That is perhaps the safest and wisest thing to do,
if not the most economical. But wouldn’t it be nice to know how to
change a fuse, install track lighting, or repair a ceiling fan? All of
these jobs require a basic knowledge of electronics technology.
If you want to learn something about the way electric works in your
home, you can always take an electronics class. There you will learn
how basic systems work and perhaps be able to start fixing a few things
on your own. In fact, you could always go for a two-year degree in
Electronic Technology at your local community college. This should
provide enough information to help you keep up with basic household
repairs and know who to call for help with the bigger jobs.
You also can find useful handbooks or electronics manuals at the
bookstore or library. Reading up on this topic will provide detailed
information on how electric makes everyday things work to our
advantage. If you have questions, you could call an expert or a
hardware store sales associate. A home supply store also may have
information available on electronic systems, and some stores offer
occasional workshops or seminars on topics related to this field.
Of course, you should always be careful when learning about electrical
systems and operations. It is easy to get shocked if you touch a live
wire or connect the wrong one. Double- and triple-check each step
before completing it to be sure you have taken adequate precautions.
Keep needed equipment on hand to avoid having to stop in the middle of
a task and run out for electrical tape or a pair of pliers.
Learning to understand electricity and its complex role in modern life
can be challenging and meaningful. Get all the information you need
before making any needed home repairs, and don’t hesitate to ask for
help if you need it. The worst mistake you could make is trying to do
electrical work that you don’t fully understand or are not prepared to
undertake, which could lead to serious or even fatal consequences.
About the Author:
You can find out even more about this complex topic when you visit the Electronics Cart at www.electronicscart.com.
Article Source: http://www.therealarticles.com
By: John Taylor
Stenciling has grown in popularity, especially in the world of interior
decorating and home design. You don’t have to be a master painter to be
able to use stencils to enhance your decor, and many find it to be an
enjoyable part of home decorating. Stenciling is also a good way to
revive an old piece of furniture, or make an old piece fit in with your
current decorating scheme.
Stenciling is much faster than hanging wallpaper, and a much more cost
effective method of redecorating. A practiced stencil artist can even
do designs that actually look like wallpaper. Stenciling can also be
done on almost any surface.
As with any new undertaking, you need to make sure you have all of the
necessary supplies before you begin to stencil. Your best investment
will be in your stencil brushes, as these are essentially the main tool
of any stenciling project. Try to purchase the highest quality stencil
brushes you can afford. You’ll be thankful you did when you see the
difference they make in the quality of your work. You’ll need to
purchase brushes in a variety of different sizes and shapes. It’s much
easier and faster if you have enough brushes to use a different brush
for each color, that way to don’t have to stop and clean your brush
between each color change.
Believe it or not, part of your stenciling success depends on having
good quality paper towels at your disposal. Many stencil techniques
require you to use what’s called the dry brush method, in which you
blot off almost all of the paint off of your brush and onto a paper
towel before stenciling. To do this successfully, you need to have a
paper towel that is capable of absorbing the paint from the brush, or
you will end up ruining your design due to your brush being too wet.
Make sure that you have the stencil firmly secured in place before you
begin Painter’s tape will usually do a nice job, but for really
intricate designs, or hard to reach places, you may find that a spray
adhesive works best. Keep in mind, that if your stencil slips, you will
end up with a big mess, instead of a beautiful design.
It is important to always clean your stencils well, because paint build
up will interfere with the design, and make it harder for you to see
what you are doing. It will also make it harder to use because the
stencil won’t lie completely flat due to paint bubbles, causing you to
mar your design. You can purchase special cleaner for your stencils,
and this works well to remove all of the excess paint build up. If you
do a good job of getting them clean, you probably will only need to lay
them flat in a sink and gently scrub both sides with water.
Since your brushes are a big investment, especially if you have
purchased high quality brushes, it is crucial that you get them cleaned
well after each use, to ensure their longevity and your success on the
next project. It’s a good idea to keep a small plastic container filled
with a brush cleaning solution on hand while you work, and toss your
brushes into it as soon as you are finished using them. Allowing them
to soak will make them much easier to clean when you’re finished with
the project for the day. Before you start to work again, your brushes
should be completely dry.
Stenciling can be a good way to pep up your current decorating scheme.
It can be done in virtually any room of the house, and with practically
any design you wish.
About the Author:
John Taylor loves to stencil. Check out his favourite stenceling website: www.stencilsmore.com
Article Source: http://www.therealarticles.com
By: Mitch Johnson
There are types of the woods which we can use for the wood carving. But
each of the woods has their own typical and characteristics. Before we
start doing the wood carving, it is better to know the types of the
wood and their characteristics. In this article we will learn about the
type of the woods and how this guidance can help us with our carved.
In the following descriptions the weight in parentheses is the approximate weight per cubic foot of air-seasoned timber.
White Afara (3 M0 lb.)
A straw-colored wood, this is a general utility hardwood. It will carve
reasonably well and is even in texture. Afara splits very readily and
takes glue, stain and polish well. It is often used for turned work and
parquet flooring. Afara is grown in tropical Africa.
Red Alder (28 lb.)
Red alder is easy to work and finishes well. It is durable even in damp climates.
Crab Apple (46 lb.)
The color is pinkish grey to light brown and the wood is suitable for
fine carving. It is hard and heavy. Unfortunately the tree does not
grow to more than 12 in. in diameter as a general rule. The wood takes
a fine natural polish with handling. It is used for mallet heads,
drawing instruments, saw handles and other purposes where a
fine-grained, reliable timber is required.
Ash (45 lb.)
Color white to light brown. Ash is a rather tough wood to carve but not
excessively so. The grain is broad in character and strongly marked.
Other uses: furniture, axe and hammer-shafts, hoops and rims.
Basswood (26 lb.)
Easily workable and soft enough that you may dispense with your mallet,
this wood tends to brittleness and is susceptible to decay. Especially
useful for woodenware, it takes stain well and can be finished to a
fine luster.
Beech (45-50 lb.)
Beech varies in color from grayish pink to warm light red. It is
plentiful in America and used widely in the furniture trade. It is a
reliable all-purpose hardwood, with an even texture that can be worked
in all directions. It carves and polishes well and will readily take
stain.
Boxwood (60 lb.)
Boxwood is remarkable for its uniform yellow color. It is almost like
ivory in that it will take very small carved detail without breaking.
Boxwood was used extensively in the seventeenth century for small
figure carving. Unfortunately, owing to the bush-like nature of the
tree, the sizes are small. It is commonly used for chessmen, modelling
tools, rulers, pulley blocks, bowls and wood engraving.
San Domingo Boxwood (58 lb.)
This wood is sometimes used as a substitute for true boxwood. The
heartwood has a yellow tinge; the sapwood is white to pale yellow. The
texture is uniform and fine. It is very durable and has a straight but
wavy grain. It carves well and takes a very high polish.
Butternut (27 lb.)
The wood of the butternut, a member of the walnut family, is much in
use for cabinetwork, inlay, and veneer as well as for carving. Unlike
the walnut, however, this wood is soft and rather weak and may be
carved entirely by hand. You should, in fact, avoid exerting too great
an effort when working with this wood since, due to the weakness of its
texture, you may easily make a larger cut than you had intended and
thus ruin your project. A light grey-brown in color, butternut will
take both paint and polish effectively.
If you are a beginner in the wood carving, it is better to choose Red
Alder and Basswood as they are easy to use. Take some advice from the
expert if you want to choose other types of the wood for your wood
carving.
About the Author:
Mitch Johnson is a regular writer for www.kitchen-plans-n-designs.com/ , www.hubforcollectables.info/ , www.goodbudgetholiday.info/
Article Source: http://www.therealarticles.com
By: Keith Londrie
Working with our hands is a sign of adroitness, scientists tell us.
While manual labor and even simple prospects like craft work have been
looked down upon in modern society, these days there seems to be a
renaissance in the crafts field. This includes bird house crafts, which
is also on the upswing, with good reason.
There are many reasons why the building of bird houses is making a
comeback. These include the increase in stress in modern society, the
drying of the waterways for many birds, and the simple desire to
create. Each of these aspects will be covered in its turn.
Let’s face it: people are stressed out. As the world’s population
increases jobs become scarcer and less secure, especially as technology
and simple specialization are on the rise so quickly. This frightens a
lot of people. Fear tends to make us look inside to our own
inner-worlds, or the immediate world of nature around us. The
appreciation of the simpler things is returning.
One avenue in this light is the making of bird house crafts. The
construction of a little home for birds is not only constructive and
stress-relieving, but also is an altruistic act which will afford birds
protection during cruel winters whilst reciprocating back with a great
satisfaction of accomplishment. In today’s high stress levels, people
are seeking out stress "relievers" and building bird house crefts is
one of those "escapes".
Another situation today, just slowly leaking out to the masses, is that
the waterways of many migratory birds are being destroyed by mankind
and subsequent pollution. Further, many trees which previously afforded
birds a refuge are no longer existent, as they’ve been felled for human
purposes. While bird house crafts won’t rectify this problem outright,
it may offer one minor solution. This is to say that a bird house will
give a bird a place to rest along a flight path that may consist of
many thousands of kilometers.
Finally, there is the desire to create. We are all gods in our own
right, particularly when it comes to creation of structures, be they
large as the Great Wall of China, or as humble as bird house crafts,
the creation of a small home for our little friends in the skies.
Whatever the reason, our tiny aviary friends thank us each time they
settle onto a perch, or inside away from the wind and rain. There is
much joy to be had with the watching of birds as they take shelter in a
bird house esspecialy crafted for them.
About the Author:
Keith Londrie II is a well known author and bird expert as well as the owner of about-bird-houses.info/ - a unique collection of information about our fine feathered friends.
Article Source: http://www.therealarticles.com
By: Joseph Then
It’s unbelievable how sewing machines can have an impact on your life.
Without a sewing machine, there are no clothes to wear and you have to
throw away for favorite clothes when there is a slight tear.
With all the technology that is out there you may not even think of
using a sewing machine any more to make cloths or even to fix them. If
you were to think about it when you use a sewing machine to fix some of
your cloths that have a small rip in them you can really save a large
amount of money in the long run.
If you are able to fix all those small rips and tears you are not going
to be throwing out a lot of cloths that are repairable. Then if you are
not throwing them out you are not going to need to spend more money to
replace all the cloths that you did pitch out the door. To some people
pitching out some ripped cloths is an advantage so that they have a
good reason to go to the store to buy more cloths for their wardrobe.
If you are one of the many people that have a sewing machine and choose
not to use it for some of the small tasks at hand then you may want to
think about making a few different items with it. You are able to make
some Halloween costumes with a sewing machine and then you are not
going to end up spending lots of money on an item that you or your kids
are only going to wear for one night of the year and probable never
wear it again. If you were to figure out what it cost to buy a costume
or even rent one and them compare it to making your own costume you are
going to see that it does cost less to make the costume in the end.
With some of the technology that the sewing machines have now you are
even able to purchase a sewing machine that can do embroidery on almost
any material. If you are one of the ones that have a machine that does
embroidery machine you are going to be able to personalize your coats
and maybe some hats for yourself and your family if your wish.
In conclusion, it will be nice to have a sewing machine at home. However small it may be, it’s a handy item.
About the Author:
Learn more about sewing machines for free and why you should have one at:
www.1-sewing-machines.info
Article Source: http://www.therealarticles.com
By: Mitch Johnson
For making ceramic you do not need a big and heavy machine. You can
easily collect all the tools from nearby market or it may be available
in your home. In the following article you will find what the things
that you need to collect.
Here’s a list of materials you will find useful in your workshop: an
inexpensive rolling pin which can be purchased at most chain stores and
toy shops: pie plates: toothpicks; building plaster; an orange stick; a
piece of ordinary, unsoaped steel wool; a sheet of grade 00 sandpaper;
a paring knife; a scraper or spatula; a coarse sponge and a small
facial sponge; some crocks or large Mason jars. You probably have most
of these things already in the home.
A plastic or crockery pitcher will also find use in the workshop, as
will a galvanized pail and a few cheap mixing bowls. If a pitcher is
not readily available, you can substitute a large tin can with a
lacquered inner surface. By pinching the rim of the lidless can, you
will form a pouring spout.
If you plan to do much work with solid clay, it will be worth while to
make yourself a wedging wire. Before clay is shaped it must always be
wedged. This is a method of mixing a mass of clay thoroughly by cutting
it in half and slamming the two pieces together on the work surface
with the cut edges in opposite directions. This is done in order to
remove all air pockets and holes which would cause a piece to explode
when fired, and to secure an even consistency.
A wedging wire is used to slice blocks of clay into two. Of course a
knife can be used, but not as handily or effectively. This device is
easily constructed by attaching dowel handles to the ends of a 12-inch
piano wire, about 18 gauges.
The more ambitious ceramist can go a step further and build a wedging
board, which serves the same purpose but is a more permanent fixture in
the workshop. You can make a simple one by constructing a 6-inch deep
wooden box measuring about 15×26 inches, and fastening at the back an
upright post measuring about 1×2x18 inches. At the top of the vertical
rod, secure a piece of non-rusting wire, not thinner than 12 gauge. The
other end of the wire is stretched to the front of the box and fastened
taut. Use a turnbuckle or a wing nut to tighten the wire.
The wedging board should be weighted by filling the box with plaster
(mixed, perhaps, with gravel or small rocks). When using the board to
cut clay, always start under the wire and draw the clay toward you.
Thus, any bit of clay flicked out by the wire will be thrown away from
you rather than hitting you in the face.
You must have to maintain more carefulness while using these tools, it
may cause you harm if not used as it is to be. After creating things by
your own self it will give you more pleasure and happiness than buying
from market, no matter whether it is in perfect shape or not.
About the Author:
Mitch Johnson is a regular writer for www.curtains-n-drapes.com/ , www.urceramicsguide.info/ , www.ezceramicsguide.info/
Article Source: http://www.therealarticles.com
By: Don McKay
For those of you who hate coffee for reasons I can’t possibly
understand there here is something you may like. My wife on occasion
makes home crafts and the thing she makes that I like the most are her
coffee scents. This is so simple yet very appealing, and the cost is
under $20.00. Here is what she does. She takes a large glass bowl and
fills it with whole coffee beans. This part is up to you. My personal
favorite is the Sumatran Dark Roast, but my wife likes vanilla flavored
coffee instead. She then gets a vanilla scented candle and lights the
candle and places it in the middle of the bowl full of beans. When the
candle wax hits the coffee beans the room starts to smell like Vanilla
Coffee. It is a relaxing smell that lingers for hours, and our guests
love it. My wife even sends them as gifts, and our family and friends
really do love it.
A Coffee Can Grill
Let’s say you have kids and you are going camping. Did you know that
your used coffee cans could be used as a grill? Yes! A coffee can
grill! Let me explain. The first thing you do is take an empty coffee
can and wash it inside and out. Then dry it completely. Take a can
opener that you would use to open a can of juice, and start punching
triangle holes every 1 inches to allow for venting. Take the plastic
lid and place it over the side you just punched to prevent it from
getting dirty. Pack a candle (unscented) about 3 inches wide by 5
inches tall. This is a cool project for the kids. When you set up your
campsite and are ready to eat light the candle and remove the plastic
lid from the coffee can. Then place the can over the candle and let it
sit for about 7 minutes. Place a ground beef patty, or hamburger patty
on top and cook it the way you like it, and "Presto!" You have just
used your disposable coffee can grill. My kids love it!
An Under The Hood Blower
If you have teenage boys that are ready to drive then listen to this
cool trick I did when I was 17 years old. I took a large Folgers coffee
can and using a hole punch I punched a hole in the center of the can. I
then emptied the coffee in the trash, because I can’t stand Folgers
coffee. Then I went to the junkyard and found a fan motor with fan
blades attached for a Chevy S-10 pick-up. Most of the fan motors for GM
are the same, but the Chevy S-10 was what I used. I then made holes in
the can for the screws that hold it in place, and the fan blades in the
center. After cutting out the center with a pair of tin snips I placed
the fan motor inside the can. I then took the can to my car and looked
for a place on the firewall to mount it. After mounting it using a
modified u-bolt made from threaded rod heated and bent I began to
measure the distance from the can to my air intake. I drilled two holes
in the can one at the top on the side and one in the bottom. I used
silicone and a 2 PVC elbows ¾ was its size and found hoses that I ran
from the can to my intake and the other I secured to the side of the
firewall leaving it connected to the can only. I ran my power source to
the fuse box and ran a toggle switch to the fan motor.
This was a fun project, because it challenged me every step of the way.
I attached this unit to my 1973 Pontiac Lemans GTO. It had a 400 big
block with Headman Headers and a Crain Fireball 2 race cam. Did I
mention the 4 speed standard transmission? When I was in 4th gear I was
doing about 60 mph then I flipped the toggle switch and floored it. My
tires chirped and I went back in my seat. My speedometer on the car
went to 120 mph. I promise you it was buried past that. I was at an old
abandoned airport runway when I tried this, and I recommend not racing
in any public place. It is illegal and you can hurt or even kill
people. A fast automobile can be a dangerous thing. Use common sense
before testing this on your car. I have to warn you if your block is
made of cast aluminum you could over heat and blow a rod. My friend did
this to a Ford Escort GT 1989. The head was badly warped and the
bearings were fried.
Coffee cans are very useful. I have used them for storage of nuts and
bolts, or any other hardware items I may have. My kids store pencils
and crayons in them. Many people store childhood memories in them kind
of like a time capsule.
About the Author:
Don is the owner of several free information websites and the owner of Java Jakes Gourmet Coffee Co.
www.megainfosource.com
www.javajakes.com
www.egolfplace.com
Article Source: http://www.therealarticles.com
« Previous Page —
Next Page »